Motorcycle BRZ X5S 300 (172FMM-7 2023)

Motorcycle BRZ X5S (172FMM-PR 264cc, 2022)

BRZ X5s is new for 2022. The motorcycle is designed specifically for experienced users who need a charged “air”. It is significantly lighter than its water-cooled older brother, and has no radiators or hoses that could be damaged if dropped. At the same time, it has very juicy “low-end” due to the increased cubic capacity. The top-end chassis has a large margin of safety and adjustment, allowing this bike to take part in competitions.

Engine

The PR300 engine is one of the most efficient produced by the Zongshen plant. The balancing shaft eliminates excess vibrations, and the enlarged 74mm piston and cylinder provide a noticeable power reserve.

Carburetor

Paired with the engine is a NIBBI PE30 SP carburetor of the sports version. It allows you to unleash the full sporting potential of the engine.

Frame

All full-size BRZ models are built on the new K8 frame. It is made in the likeness of the KTM 2017-2022 frame. Thanks to the lightweight steel frame, the motorcycle has the correct weight distribution, it handles better in corners and is more stable at high speeds. An aluminum engine guard is installed on the front of the frame.

Subframe

The subframe is made of aluminum. Lightweight and durable, unlike plastic, it can withstand falls or unwanted flips, and can be straightened out if deformed.

Pendulum

Paired with the new frame, a new pendulum is used. It is produced using gravity casting technology, which gives high torsional rigidity. From the factory, the pendulum is covered in plastic protection. She will take all the scratches and blows. If you want to return your motorcycle to its factory appearance, simply update the protection.

Wheels

The BRZ X5s uses reinforced hubs that are made from a single piece of CNC machined aluminum. 4mm reinforced spokes, aluminum rims "Enduro X series" from aircraft aluminum 7075.

Tires

Tires of the European brand "Golden Tire", supplied under the Mariey brand , made of a moderately soft compound, especially for enduro. They have good grip on hard rocky surfaces and, due to their high tread, work well in mud and sand. The rear tire is 120mm wide, now there is no need to change tires on a new motorcycle!

Suspension

The BRZ X5s gets HT suspension. Front fork with open cartridge QXF01RC. Mirror diameter 48mm. The fork is fully adjustable for rebound and compression. The QXR01 rear shock with remote reservoir also has rebound and compression adjustments. The suspension performs well on slow rock sections and fast motocross sections, absorbs all the bumps and compensates for piloting errors.

Cross beams

CNC cross bars are made of 7075 aircraft grade aluminum. They can withstand heavy loads, are lightweight and durable.

Brakes

The brakes are completely identical to the Brembo configuration. Predictably and reliably stop the bike at any speed. To protect the brake discs from deformation, protective covers are installed at the front and rear.

Fuel tank

The updated fuel tank has an increased volume, the power reserve is on average more than 100 km. Translucent plastic allows you to visually monitor the fuel level even while moving. The new tank does not have a left “cheek” protruding beyond the plastic dimensions; the fuel tap does not suffer when the motorcycle falls on the left side.

Filterbox

In the new generation, the filterbox provides quick and easy access to the air filter. The filter itself has an increased surface area, providing more clean air for the engine. The filter is factory treated with oil that traps small dust particles.

Steering

The X5m is equipped with a durable aluminum steering wheel with a diameter of 28 mm of variable section. As standard, the motorcycle comes with hand protection and improved handlebar mounts, which reduce the risk of rotation in the event of a fall. The clutch and brake levers have convenient offset adjustments, providing additional comfort when piloting. In case of a fall, they can also fold in two planes, the risk of breakage is minimal. The new models are equipped with a short-stroke NIBBI throttle grip with a roller bearing. Thanks to the short stroke, there is no need to waste energy on intercepting your hand when opening the gas.

Footboards

Self-cleaning footboards do not become clogged with dirt. The boots will always maintain traction, no need to take your eyes off the road. A brake pedal safety cable was also added. It will protect the brake pedal from damage if a tree branch gets between the engine and the pedal.

Seat

The updated seat is made of more durable material, and special strips prevent the seat from sliding on long climbs.

Design

The BRZ X5s 22 model year is made in the design of KTM 2020-2022. Special individuality is emphasized by the use of different colored plastic on the front and rear of the motorcycle. The back of all models is black. The front part is made in its own color scheme. The headlight also received a new design. It became five-LED with a lower “eyelash”. Particular attention is paid to stickers. New technologies were used in the graphic design, which made it possible to create individual elements with a mirror effect. The colors of all elements are selected in such a way that the motorcycle looks as harmonious and complete as possible.

Assembly

Particular attention is paid to the assembly of motorcycles. All BRZ motorcycles come from the factory with Motul 7100 10w40 oil. Waterproof wiring connectors are used. All bearings are treated with special grease. You no longer need to spend extra money and time preparing your motorcycle for use.